top of page
Anchor 25

1/25

Vintage Muscle Car

Pontiac GTO '67

pontiac GTO3.JPG
pontiac GTO0.JPG
pontiac GTO1.JPG
pontiac GTO5.JPG
pontiac GTO2.JPG
pontiac GTO4.JPG
pontiac GTO8.JPG
pontiac GTO7.JPG
pontiac GTO6.JPG
pontiac GTO14.jpg
pontiac GTO9.jpg
pontiac GTO11.jpg
pontiac GTO13.jpg
pontiac GTO12.jpg
pontiac GTO10.jpg

About Car

The Pontiac GTO is an automobile that was built by Pontiac in generations from 1964 to 1974 model years, and by GM's subsidiary Holden in Australia from 2004 to 2006. 
 
The GTO also saw several mechanical changes in 1967. The Tri-Power carburetion system was replaced with a Rochester Quadrajet four-barrel carburetor. The 389 engine received a larger cylinder bore (4.12 inches, 104.7 mm) for a total displacement of 400 CID (6.5 L) V8. The 400 cubic inch engine was available in three models: economy, standard, and high output. The economy engine used a two-barrel carburetor rather than the Rochester Quadrajet and produced 265 hp (198 kW) at 4400 rpm, and 397 lb·ft (538 N·m) at 3400 rpm. The standard engine produced 335 hp (250 kW) at 5000 rpm, and the highest torque of the three engines at 441 lb·ft (598 N·m) at 3400 rpm. The high output engine produced the most power for that year at 360 hp (270 kW) at 5100 rpm, and produced 438 lb·ft (594 N·m) at 3600 rpm. Emission controls were fitted in GTOs sold in California.
 

Kit & Construction

1/25 MPC Kit •
Photo etched Interior and Exterior Details.
Scratch Build Engine Details
Vacu-Form Glasses
Scratch Build Headlights
bottom of page